Are your trips in and around your room obstructed by the eerie and unusual sound emitted by the heating AC unit?
If the answer to the above question is a YES, then chances are your heating AC system is dealing with a crisis.
The groaning, jarring and the clanging sounds are an obvious indication.
That said, here are some other signs that convey your heating AC unit is in need of a heating AC technician in Baltimore.
- System is turned on, but not in effect
- Heating AC unit is dripping water
- Abrupt shutting down of your system
- Generation of an unpleasant odor
- Uneven heating and cooling across your room
If the heating AC issues aren’t resolved well in time not only will they cause discomfort but they will also increase your utility bills drastically.
During the peak season, if the heating AC unit fails, the heating AC technician may take hours to arrive, and you’ll end up spending around $250 on its repair.
The heating AC units work on a standard principle.
If you’re comfortable working with electrical projects and are willing to do away with a few extra bucks, you can repair the heating AC unit in two hours.
The materials that you’ll need to fix some common issues are listed below.
- Capacitor
- Compressed air
- Condenser fan motor
- Contactor
- Fuses
6 Simple Steps to Fix the Heating AC Unit on Your Own
Step 1: Ensure the culprit isn’t the furnace
Lower the temperature setting and arrange your thermostat to AC mode.
If the furnace fan runs, there’s no issue with the furnace.
If the furnace fan doesn’t kick in, reset the circuit breaker.
If the problem still persists, call a pro.
Step2: Check for clogs
Clogging of the condenser coils can cause the compressor to overheat and shut down.
Turn off the power and clean the furnace filters and condenser coils.
You can test if you have resolved the problem successfully by letting the blower run for at least 30 minutes.
If the AC functions well for the next 12 hours, then it’s a job well done.
Step 3: Test the fuses
A blown fuse is a visible indication of a failing part of the condensing unit. Replace and install new fuses.
If it blows again, then you’ve got a more pressing issue that can best be addressed by a heating AC service professional near you.
Step 4: Test the capacitor
Capacitors can wear off over time, providing less startup power over time or they might fail in an instant.
Since capacitors are cheap, it pays well to replace yours about every five years proactively.
Step 5: Replace the Contractor
AC contactors can degrade quickly and are the primary reason for air conditioning service failures.
Even if your contractor is working, it is advisable to replace it every five years or so. This adds life to the efficiency of the air conditioner.
Step 6: Run Tests
If you find that in spite of fixing a few issues, the heating AC unit is not functioning like it should, then you can always hire a local heating AC repair technician in Baltimore.
Same Day Pros has a list of heating AC repair pros already working in their neighborhood. What’s more is that they are licensed, insured and extensively trained.
For more heating AC repair tips, tricks and hacks, you can visit the Same Day Pros Facebook page and Twitter handle.
